Condair SH2 - The simple solution for humidifing and cooling with advantages

The low-energy Condair SH2 evaporation humidifier/cooler is specially designed for integration in central air conditioning systems. The core element of the humidifier is the patented humidifier box which, in addition to efficient humidifying, ensures that cooling of over 10°C is realised. The SH2 control unit and real-time clock with freely-programmable washing cycles ensure that operation is uncomplicated and safe.
Condair SH2 characteristics at a glance:
- Humidifier box made of synthetic mats free of glass fibre with an
impressed V-profile for efficient and healthy humidifying/cooling
- Simple and uncomplicated installation
- Low installation and operational costs for short and long-term cost
reductions
- Water management integrated in the SH2 control unit for optimising
water consumption and humidity control
- For all water qualities: mains, softened and fully-demineralised water
- Water circulation pump powered by single-phase current
- Adiabatic evaporation cooling of over 10°C
- UV for water disinfection

V-profile humidifier box
The core element of the SH2 is the patented humidifier box located in the air duct. Dry air flows through the box, water flows over the hygroscopic mats and the extremely large wet surface releases humidity to the air . This method enables air humidifying or cooling with limited electrical energy.

Model
The Condair SH2 is available in two basic versions. The “flow” model with direct water drainage and the “Reflow” model for water re-circulation. The circulation pump conveys the water in the latter via EPDM plastic hoses to the spray beam located above the humidifier box. The water then trickles vertically through the boxes. The water not needed for humidifying flows back into the water tray where it is collected and re-circulated. The water is not collected in the water tray in the case of the “flow” model, but rather flows directly into the drain.

Installation
Installation of the SH2 is simple and uncomplicated. The non-corrosive water tray and lateral supports can be integrated in the ventilation duct in a matter of minutes. The humidifier boxes can be mounted in the simplest of manners.

SH2 control
The SH2 control unit controls the humidity and governs the water management. The integrated processor with real-time clock controls the air humidity, water descaling, unit purging and water quality control, all fully automatically. The control is designed for connection to building management systems.